位置：USB5816CT-I/KD > USB5816CT-I/KD詳情
USB5816CT-I/KD中文資料
USB5816CT-I/KD數據手冊規格書PDF詳情
General Description
The Microchip USB5816C hub is a low-power, OEM configurable, USB 3.2 Gen 1 hub controller with 6 downstream
ports and advanced features for embedded USB applications. The USB5816C is fully compliant with the Universal Serial
Bus Revision 3.1 Specification and USB 2.0 Link Power Management Addendum. The USB5816C supports 5 Gbps
SuperSpeed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps Low-Speed (LS) USB downstream
devices on all enabled downstream ports.
The USB5816C supports the legacy USB speeds (HS/FS/LS) through a dedicated USB 2.0 hub controller that is the
culmination of five generations of Microchip hub controller design and experience with proven reliability, interoperability,
and device compatibility. The SuperSpeed hub controller operates in parallel with the USB 2.0 hub controller, decoupling
the 5 Gbps SS data transfers from bottlenecks due to the slower USB 2.0 traffic.
The USB5816C hub feature controller enables OEMs to configure their system using “Configuration Straps.” These
straps simplify the configuration process, assigning default values to USB 3.2 Gen 1 ports and GPIOs. OEMs can disable
ports, enable battery charging, and define GPIO functions as default assignments on power-up, removing the need
for OTP or external SPI ROM.
The USB5816C supports downstream battery charging via the integrated battery charger detection circuitry, which supports
the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. The USB5816C provides the
battery charging handshake and supports the following USB-IF BC1.2 charging profiles:
? DCP: Dedicated Charging Port (Power brick with no data)
? CDP: Charging Downstream Port (1.5A with data)
? SDP: Standard Downstream Port (0.5A with data)
? Custom profiles loaded via SMBus or OTP
Additionally, the USB5816C includes many powerful and unique features such as:
The Hub Feature Controller, which provides an internal USB device dedicated for use as a USB to I2C/UART/SPI/
GPIO interface, allowing external circuits or devices to be monitored, controlled, or configured via the USB interface.
PortSwap, which adds per-port programmability to USB differential-pair pin locations. PortSwap allows direct alignment
of USB signals (D+/D-) to connectors to avoid uneven trace length or crossing of the USB differential signals on the
PCB.
PHYBoost, which provides programmable levels of Hi-Speed USB signal drive strength
in the downstream port transceivers. PHYBoost attempts to restore USB signal integrity
in a compromised system environment. The graphic on the right shows an example of
Hi-Speed USB eye diagrams before and after PHYBoost signal integrity restoration. in
a compromised system environment.
VariSense, which controls the USB receiver sensitivity enabling programmable levels of USB signal receive sensitivity.
This capability allows operation in a sub-optimal system environment, such as when a captive USB cable is used.
Port Split, which allows for the USB3.1 Gen1 and USB2.0 portions of downstream ports 4 and 5to operate independently
and enumerate two separate devices in parallel in special applications.
USB Power Delivery Billboard Device, which allows an internal device to enumerate as a Billboard class device when
a Power Delivery Alternate Mode negotiation has failed. The Billboard device will enumerate temporarily to the host PC
when a failure occurs, as indicated by a digital signal from an external Power Delivery controller.
The USB5816C can be configured for operation through internal default settings. Custom OEM configurations are supported
through external SPI ROM or OTP ROM. All port control signal pins are under firmware control in order to allow
for maximum operational flexibility, and are available as GPIOs for customer specific use.
The USB5816C is available in commercial (0°C to +70°C) and industrial (-40°C to +85°C) temperature ranges. An internal
block diagram of the USB5816C is shown in Figure 2-1.
Highlights
? USB Hub Feature Controller IC Hub with:
- 1 USB 3.1 Gen 1 USB Type-C? downstream port
- 4 USB 3.1 Gen 1 legacy downstream ports
- 1 USB 2.0 downstream port
- Legacy upstream port
? USB-IF Battery Charger revision 1.2 support on
up & downstream ports (DCP, CDP, SDP)
? Internal Hub Feature Controller device enables:
- USB to I2C/SPI/GPIO bridge endpoint support
- USB to internal hub register write and read
? USB Link Power Management (LPM) support
? Enhanced OEM configuration options available
through either OTP or SPI ROM
? (TID 963) USB-IF certified, supporting latest
Engineering Change Notices for compliance with
USB-IF logo testing for new USB Type-C?
industry initiative (Revision C or newer only)
- Header Packet Timer (TD7.9, TD7.11, TD7.26)
- Power Management Timer (TD7.18, TD7.20, TD7.23)
- Unacknowledged Connect and Remote
Wake Test Failure (TD10.25)
? Available in 100-pin (12mm x 12mm) VQFN
RoHS compliant package
? Commercial and industrial grade temperature support
Target Applications
? Standalone USB Hubs
? Laptop Docks
? PC Motherboards
? PC Monitor Docks
? Multi-function USB 3.2 Gen 1 Peripherals
| 供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
|---|---|---|---|---|---|---|---|
Microchip |
23+ |
VQFN |
22000 |
一級代理原裝正品,實單必成。 |
|||
MICROCHIP(美國微芯) |
24+ |
QFN-100-EP(12x12) |
9555 |
支持大陸交貨,美金交易。原裝現貨庫存。 |
|||
MICROCHIP(美國微芯) |
2447 |
VQFN-100 |
31500 |
2500個/圓盤一級代理專營品牌!原裝正品,優勢現貨, |
|||
Microchip(微芯) |
2324+ |
Microchip(微芯) |
78920 |
二十余載金牌老企,研究所優秀合供單位,您的原廠窗口 |
|||
MICROCHIP(美國微芯) |
23+ |
QFN-100-EP(12x12) |
7087 |
原裝現貨,免費送樣,可開原型號稅票。提供技術支持 |
|||
Microchip Technology |
25+ |
100-VFQFN 裸露焊盤 |
9350 |
獨立分銷商 公司只做原裝 誠心經營 免費試樣正品保證 |
|||
Microchip/微芯 |
25+ |
原廠封裝 |
10280 |
原廠授權代理,專注軍工、汽車、醫療、工業、新能源！ |
|||
Microchip |
22+ |
100VQFN |
9000 |
原廠渠道,現貨配單 |
|||
Microchip |
23+ |
100VQFN |
9000 |
原裝正品，支持實單 |
|||
Microchip |
23+ |
100VQFN |
8000 |
只做原裝現貨 |
USB5816CT-I/KD 資料下載更多...
USB5816CT-I/KD 芯片相關型號
MICROCHIP相關芯片制造商
Datasheet數據表PDF頁碼索引
- P1
- P2
- P3
- P4
- P5
- P6
- P7
- P8
- P9
- P10
- P11
- P12
- P13
- P14
- P15
- P16
- P17
- P18
- P19
- P20
- P21
- P22
- P23
- P24
- P25
- P26
- P27
- P28
- P29
- P30
- P31
- P32
- P33
- P34
- P35
- P36
- P37
- P38
- P39
- P40
- P41
- P42
- P43
- P44
- P45
- P46
- P47
- P48
- P49
- P50
- P51
- P52
- P53
- P54
- P55
- P56
- P57
- P58
- P59
- P60
- P61
- P62
- P63
- P64
- P65
- P66
- P67
- P68
- P69
- P70
- P71
- P72
- P73
- P74
- P75
- P76
- P77
- P78
- P79
- P80
- P81
- P82
- P83
- P84
- P85
- P86
- P87
- P88
- P89
- P90
- P91
- P92
- P93
- P94
- P95
- P96
- P97
- P98
- P99
- P100
- P101
- P102
Microchip Technology 微芯科技股份有限公司
中文資料: 155285條
微芯科技股份有限公司（英語：MicrochipTechnologyInc.，英文簡寫：Microchip），是一個美國微控制器、內存與類比半導體制造商。它的產品包含微控制器（PIC微控制器、dsPIC/PIC24、PIC32）、序列式EEPROM、序列式SRAM、KEELOQ組件、無線電頻率（RF）組件、熱組件、功率與電池管理類比組件，也有線性、接口與混合信號組件。還有一些接口組件包含USB、ZigBee/MiWi，CANbus與Ethernet。公司總部位于亞利桑那州錢德勒，晶圓廠則分別位于亞利桑那州坦佩及奧勒岡州格雷斯罕。主要的競爭者有亞德諾半導體、愛特梅爾、飛思卡爾（分拆自摩托羅拉）、英
