精品国产99久久久久久www_亚洲精彩视频在线观看的_性欧美婬妇ⅹxxx视频_里番肉工口全彩老师_a天堂最新在线观看_精品国产在天天在线观看_免费看那种视频_樱桃电视剧全集播放_成人性视频免费看的鲁片_中国伦理影院

General Description

The Microchip USB7002 hub is low-power, OEM configurable, USB 3.2 Gen 1 hub controller with 4 downstream ports

and advanced features for embedded USB applications. The USB7002 is fully compliant with the Universal Serial Bus

Revision 3.2 Specification and USB 2.0 Link Power Management Addendum. The USB7002 supports 5 Gbps Super-

Speed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps Low-Speed (LS) USB downstream

devices on two standard USB 3.2 Gen 1 downstream ports and only legacy speeds (HS/FS/LS) on two standard USB

2.0 downstream ports.

The USB7002 supports native Type-C connectivity on the upstream port and two of the downstream ports. The hub

includes internal Type-C CC pin logic and an internal USB 3.2 Gen 1 multiplexer to support both Type-C insertion orientations.

The USB7002 supports the legacy USB speeds (HS/FS/LS) through a dedicated USB 2.0 hub controller that is the culmination

of six generations of Microchip hub feature controller design and experience with proven reliability, interoperability,

and device compatibility. The SuperSpeed hub controller operates in parallel with the USB 2.0 controller,

decoupling the 5 Gbps SS data transfers from bottlenecks due to the slower USB 2.0 traffic.

The USB7002 enables OEMs to configure their system using “Configuration Straps.” These straps simplify the configuration

process assigning default values to USB 3.2 Gen 1 ports and GPIOs. OEMs can disable ports, enable battery

charging and define GPIO functions as default assignments on power up.

The USB7002 supports downstream battery charging. The USB7002 integrated battery charger detection circuitry supports

the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. The USB7002 provides the battery

charging handshake and supports the following USB-IF BC1.2 charging profiles:

? DCP: Dedicated Charging Port (Power brick with no data)

? CDP: Charging Downstream Port (1.5A with data)

? SDP: Standard Downstream Port (0.5A with data)

? Custom profiles loaded via SPI EEPROM or OTP

Additionally, the USB7002 includes many powerful and unique features such as:

The Hub Feature Controller, an internal USB device dedicated for use as a USB to I2C/UART/SPI/GPIO interface that

allows external circuits or devices to be monitored, controlled, or configured via the USB interface.

Multi-Host Endpoint Reflector, which provides unique USB functionality whereby USB data can be “mirrored” between

two USB hosts (Multi-Host) in order to perform a single USB transaction.This capability is fully covered by Microchip

intellectual property (U.S. Pat. Nos. 7,523,243 and 7,627,708) and is instrumental in enabling Apple CarPlay?, where

the Apple iPhone? becomes a USB Host.

FlexConnect, which provides flexible connectivity options. Any one of the USB7002’s downstream ports can be reconfigured

to become the upstream port, allowing master capable devices to control other devices on the hub.

AEC-Q100 compliance:, which tailors the device for use in automotive applications requiring automotive grade robustness,

starting with the comprehension of proprietary design for reliability techniques within the silicon IC itself, as well

as for the package design.

? Automotive qualified technologies and processes are used to fabricate the products with enhanced monitors to

continuously drive improvements in accordance with Microchip's zero-dpm methodology.

? Product qualification is focused on customer expectations and exceeds many of the automotive reliability standards

including AEC-Q100.

? Microchip automotive services are provided during the life of the product from a dedicated organization of operations,

quality, and product support personnel specialized in meeting the requirements of the automotive customer.

PortSwap, which adds per-port programmability to USB differential-pair pin locations. PortSwap allows direct alignment

of USB signals (D+/D-) to connectors to avoid uneven trace length or crossing of the USB differential signals on the

PCB.

PHYBoost, which provides programmable levels of Hi-Speed USB signal drive strength

in the downstream port transceivers. PHYBoost attempts to restore USB signal integrity

in a compromised system environment. The graphic on the right shows an example of

Hi-Speed USB eye diagrams before and after PHYBoost signal integrity restoration. in

a compromised system environment.

Highlights

? 4-Port USB SmartHub? IC with:

- Native USB Type-C? support on upstream port

- Native USB Type-C support on downstream ports

1 and 2

- Two Standard USB 2.0 downstream ports

- Internal Hub Feature Controller device which

enables:

- USB to I2

C/SPI/UART/I2S/GPIO bridge endpoint

support

- USB to internal hub register write and read

? USB-IF Certified - TID 1212. Testing includes:

- USB 3.2 Gen 1 Hub with BC1.2 support

- Billboard endpoint device for Alternate Mode negotiation

status

- Advanced multi-port system policy management

? USB Link Power Management (LPM) support

? USB-IF Battery Charger revision 1.2 support on

downstream ports (DCP, CDP, SDP)

? Enhanced OEM configuration options available

through either OTP or SPI ROM

? Commercial and industrial grade temperature

support

? Automotive/AEC-Q100 qualified

Target Applications

? Standalone USB Hubs

? Laptop Docks

? PC Motherboards

? PC Monitor Docks

? Multi-function USB 3.2 Gen 1 Peripherals

? Automotive integrated head unit and breakout box

Key Benefits

? USB 3.2 Gen 1 compliant 5 Gbps, 480 Mbps, 12

Mbps, and 1.5Mbps operation

- 5V tolerant USB 2.0 pins

- 1.32V tolerant USB 3.2 Gen 1 pins

- Integrated termination and pull-up/down resistors

? Native USB Type-C Support

- Type-C CC Pin with integrated Rp and Rd

- Integrated multiplexer on USB Type-C enabled

ports. USB 3.2 Gen 1 PHYs are disabled until a

valid Type-C attach is detected, saving idle power.

- Control for external VCONN supply

? Supports battery charging of most popular battery

powered devices on all ports

- USB-IF Battery Charging rev. 1.2 support

(DCP, CDP, SDP)

- Apple? portable product charger emulation

- Chinese YD/T 1591-2006 charger emulation

- Chinese YD/T 1591-2009 charger emulation

- European Union universal mobile charger support

- Supports additional portable devices

? On-chip Microcontroller

- Manages I/Os, VBUS, and other signals

? 64kB RAM, 256kB ROM

? 8kB One-Time-Programmable (OTP) ROM

- Includes on-chip charge pump

? Configuration programming via OTP ROM, SPI

ROM, or SMBus

? FlexConnect

- The roles of the upstream and any downstream

port are reversible on command

? Multi-Host Endpoint Reflector

- Integrated host-controller endpoint reflector via

CDC/NCM device class for automotive applications

? USB Bridging

- USB to I2C, SPI, UART, I2S, and GPIO

? PortSwap

- Configurable USB 2.0 differential pair signal swapping

? PHYBoost

- Programmable USB 2.0 transceiver drive strength

for recovering signal integrity

? VariSense

- Programmable USB 2.0 receiver sensitivity

? Compatible with Microsoft Windows 10, 8, 7, XP,

Apple OS X 10.4+, and Linux hub drivers

? Optimized for low-power operation and low thermal

dissipation

? Package: 100-pin RoHS compliant VQFN

(12mm x 12mm)

* USB Type-C? and USB-C? are trademarks of USB Implementers Forum.