精品国产99久久久久久www_亚洲精彩视频在线观看的_性欧美婬妇ⅹxxx视频_里番肉工口全彩老师_a天堂最新在线观看_精品国产在天天在线观看_免费看那种视频_樱桃电视剧全集播放_成人性视频免费看的鲁片_中国伦理影院

General description

The LPC55S0x/LPC550x is an ARM Cortex-M33 based microcontroller for embedded

applications. These devices include CASPER Crypto engine, up to 256 KB on-chip flash,

up to 96 KB of on-chip SRAM, PRINCE module for on-the-fly flash encryption/decryption,

Code Watchdog, CAN FD, five general-purpose timers, one SCTimer/PWM, one

RTC/alarm timer, one 24-bit Multi-Rate Timer (MRT), a Windowed Watchdog Timer

(WWDT), nine flexible serial communication peripherals (which can be configured as a

USART, SPI, high speed SPI, I2C, or I2S interface), Programmable Logic Unit (PLU), one

16-bit 2.0 Msamples/sec ADC capable of simultaneous conversions, comparator, and

temperature sensor.

The ARM Cortex-M33 provides a security foundation, offering isolation to protect valuable

IP and data with TrustZone? technology. It simplifies the design and software

development of digital signal control systems with the integrated digital signal processing

(DSP) instructions. To support security requirements, the LPC55S0x/LPC550x also offers

support for secure boot, HASH, AES, RSA, UUID, DICE, dynamic encrypt and decrypt,

debug authentication, and TBSA compliance.

Features and benefits

? ARM Cortex-M33 core (r0p4):

? Running at a frequency of up to 96 MHz.

? Integrated digital signal processing (DSP) instructions.

? TrustZone?, Floating Point Unit (FPU) and Memory Protection Unit (MPU).

? ARM Cortex M33 built-in Nested Vectored Interrupt Controller (NVIC).

? Non-maskable Interrupt (NMI) input with a selection of sources.

? Serial Wire Debug with eight breakpoints and four watch points. Includes Serial

Wire Output for enhanced debug capabilities.

? System tick timer.

? CASPER Crypto co-processor is provided to enable hardware acceleration for various

functions required for certain asymmetric cryptographic algorithms, such as, Elliptic

Curve Cryptography (ECC).

? On-chip memory:

? Up to 256 KB on-chip flash program memory with flash accelerator and 512 byte

page erase and write.

? Up to 96 KB total SRAM consisting of 16 KB SRAM on Code Bus, 64 KB SRAM on

System Bus (64 KB is contiguous), and additional 16 KB SRAM on System Bus.

? PRINCE module for real-time encryption of data being written to on-chip flash and

decryption of encrypted flash data during read to allow asset protection, such as

securing application code, and enabling secure flash update.

? On-chip ROM bootloader supports:

? Booting of images from on-chip flash

? Supports CRC32 image integrity checking.

? Supports flash programming through In System Programming (ISP) commands

over following interfaces: UART interface (Flexcomm 0) with auto baud, SPI slave

interfaces (Flexcomm 3 or 8) using mode 3 (CPOL = 1 and CPHA = 1), and I2C

slave interface (Flexcomm 1)

? ROM API functions: Flash programming API, Power control API, and Secure

firmware update API using NXP Secure Boot file format, version 2.0 (SB2 files).

? Supports booting of images from PRINCE encrypted flash regions.

? Support NXP Debug Authentication Protocol version 1.0 (RSA-2048) and 1.1

(RSA-4096).

? Supports setting a sealed part to Fault Analysis mode through Debug

authentication.

? Secure Boot support:

? Uses RSASSA-PKCS1-v1_5 signature of SHA256 digest as cryptographic

signature verification.

? Supports RSA-2048 bit public keys (2048 bit modulus, 32-bit exponent).

? Supports RSA-4096 bit public keys (4096 bit modulus, 32-bit exponent).

? Uses x509 certificate format to validate image public keys.

? Supports up to four revocable Root of Trust (RoT) or Certificate Authority keys,

Root of Trust establishment by storing the SHA-256 hash digest of the hashes of

four RoT public keys in protected flash region (PFR).

? Supports anti-rollback feature using image key revocation and supports up to 16

Image key certificates revocations using Serial Number field in x509 certificate.

? Supports Device Identifier Composition Engine (DICE) Specification (version

Family 2.0, Level 00 Revision 69) specified by Trusted Computing Group.

? Serial interfaces:

? Flexcomm Interface contains up to nine serial peripherals (Flexcomm Interface 0-7

and Flexcomm Interface 8). Each Flexcomm Interface (except flexcomm 8, which

is dedicated for high-speed SPI) can be selected by software to be a USART, SPI,

I2C, and I2S interface. Each Flexcomm Interface includes a FIFO that supports

USART, SPI, and I2S. A variety of clocking options are available to each Flexcomm

Interface, including a shared fractional baud-rate generator, and time-out

feature.Flexcomm interfaces 0 to 5 each provide one channel pair of I2S and

Flexcomm interfaces 6 to 7 each provide four channel pairs of I2S.

? I2C-bus interfaces support Fast-mode and Fast-mode Plus with data rates of up to

1Mbit/s and with multiple address recognition and monitor mode. Two sets of true

I2C pads also support high-speed Mode (3.4 Mbit/s) as a slave.

? Digital peripherals:

? DMA0 controller with 23 channels and up to 22 programmable triggers, able to

access all memories and DMA-capable peripherals.

? DMA1 controller with 10 channels and up to 15 programmable triggers, able to

access all memories and DMA-capable peripherals.

? CAN FD module with dedicated DMA controller

? CRC engine block can calculate a CRC on supplied data using one of three

standard polynomials with DMA support.

? Up to 45 General-Purpose Input/Output (GPIO) pins.

? GPIO registers are located on the AHB for fast access. The DMA supports GPIO

ports.

? Up to eight GPIOs can be selected as pin interrupts (PINT), triggered by rising,

falling or both input edges.

? Two GPIO grouped interrupts (GINT) enable an interrupt based on a logical

(AND/OR) combination of input states.

? I/O pin configuration with support for up to 16 function options.

? Programmable Logic Unit (PLU) to create small combinatorial and/or sequential

logic networks including state machines.

? Security Features:

? ARM TrustZone? enabled.

? AES-256 encryption/decryption engine with keys fed directly from PUF or a

software supplied key

? Secure Hash Algorithm (SHA2) module supports secure boot with dedicated DMA

controller.

? Physical Unclonable Function (PUF) using dedicated SRAM for silicon fingerprint.

PUF can generate, store, and reconstruct key sizes from 64 to 4096 bits. Includes

hardware for key extraction.

? True Random Number Generator (TRNG).

? 128 bit unique device serial number for identification (UUID).

? Secure GPIO.

? Code Watchdog for detecting code flow integrity.

? Timers:

? Five 32-bit standard general purpose asynchronous timers/counters, which support

up to four capture inputs and four compare outputs, PWM mode, and external

count input. Specific timer events can be selected to generate DMA requests.

? One SCTimer/PWM with 8 input and 10 output functions (including 16 capture and

match registers). Inputs and outputs can be routed to or from external pins and

internally to or from selected peripherals. Internally, the SCTimer/PWM supports 16

captures/matches, 16 events, and 32 states.

? 32-bit Real-time clock (RTC) with 1 s resolution running in the always-on power

domain. Another timer in the RTC can be used for wake-up from all low power

modes including deep power-down, with 1 ms resolution. The RTC is clocked by

the 32 kHz FRO or 32.768 kHz external crystal.

? Multiple-channel multi-rate 24-bit timer (MRT) for repetitive interrupt generation at

up to four programmable, fixed rates.

? Windowed Watchdog Timer (WWDT) with FRO 1 MHz as clock source.

? Code Watchdog for detecting code flow integrity.

? The Micro-Tick Timer running from the watchdog oscillator can be used to wake-up

the device from sleep and deep-sleep modes. Includes 4 capture registers with pin

inputs.

? 42-bit free running OS Timer as continuous time-base for the system, available in

any reduced power modes. It runs on 32 kHz clock source, allowing a count period

of more than 4 years.

? Analog peripherals:

? 16-bit ADC with five differential channel pair (or 10 single-ended channels), and

with multiple internal and external trigger inputs and sample rates of up to 2.0

MSamples/sec. The ADC support simultaneous conversions, on 2 ADC input

channels belonging to a differential pair.

? Integrated temperature sensor connected to the ADC.

? Comparator with five input pins and external or internal reference voltage.

? Clock generation:

? Internal Free Running Oscillator (FRO). This oscillator provides a selectable 96

MHz output, and a 12 MHz output (divided down from the selected higher

frequency) that can be used as a system clock. The FRO is trimmed to +/- 1

accuracy over the entire voltage and 0 C to 85 C. The FRO is trimmed to +/- 2

accuracy over the entire voltage and -40 C to 105 C.

? 32 kHz Internal Free Running Oscillator FRO. The FRO is trimmed to +/- 2

accuracy over the entire voltage and temperature range.

? Internal low power oscillator (FRO 1 MHz) trimmed to +/- 15 accuracy over the

entire voltage and temperature range.

? Crystal oscillator with an operating frequency of 16 MHz to 32 MHz. Option for

external clock input (bypass mode) for clock frequencies of up to 25 MHz.

? Crystal oscillator with 32.768 kHz operating frequency.

? PLL0 and PLL1 allows CPU operation up to the maximum CPU rate without the

need for a high-frequency external clock. PLL0 and PLL1 can run from the internal

FRO 12 MHz output, the external oscillator, internal FRO 1 MHz output, or the

32.768 kHz RTC oscillator.

? Clock output function with divider to monitor internal clocks.

? Frequency measurement unit for measuring the frequency of any on-chip or

off-chip clock signal.

? Each crystal oscillator has one embedded capacitor bank, where each can be used

as an integrated load capacitor for the crystal oscillators. Using APIs, the capacitor

banks on each crystal pin can tune the frequency for crystals with a Capacitive

Load (CL) leading to conserving board space and reducing costs.

? Power-saving modes and wake-up:

? Integrated PMU (Power Management Unit) to minimize power consumption.

? Reduced power modes: Sleep, deep-sleep with RAM retention, power-down with

RAM retention and CPU retention, and deep power-down with RAM retention.

? Configurable wake-up options from peripherals interrupts.

? The Micro-Tick Timer running from the watchdog oscillator, and the Real-Time

Clock (RTC) running from the 32.768 kHz clock, can be used to wake-up the

device from sleep and deep-sleep modes.

? Power-On Reset (POR) (around 0.8 V).

? Brown-Out Detectors (BOD) for VBAT_DCDC with separate thresholds for forced reset.

? Operating from internal DC-DC converter.

? Single power supply 1.8 V to 3.6 V.

? JTAG boundary scan supported.

? Operating temperature range ?40 °C to +105 °C.

? Available in HTQFP64 and HVQFN48 packages.